Stirrer Accessories
Chemglass Life Sciences 12.7mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Female Coupling, For Use with CG-2021 Thru CG-2025
12.7mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Female Coupling, For Use with CG-2021 Thru CG-2025. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 12.7mm (OD) stirrer shafts. Female Upper Coupling is 3/8". For use with CG-2021 thru CG-2025 series of motors and stirrersOverall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences 12.7mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud
12.7mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences 19mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck
19mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 19mm (OD) stirrer shafts. Upper adapters permit the coupling to be used with a standard Jacobs style 3-jaw chuck. Male Upper Coupling is 3/8". Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences 25.4mm Tru-Stir Stirrer Shaft Coupling, 1/2" Upper Female Coupling, For Use with CG-2025-20
25.4mm Tru-Stir Stirrer Shaft Coupling, 1/2" Upper Female Coupling, For Use with CG-2025-20. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 25.4mm (OD) stirrer shafts. Female Upper Coupling is 1/2". For use with CG-2021 thru CG-2025 series of motors and stirrers. Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences 19mm Tru-Stir Stirrer Shaft Coupling, 1/2" Upper Female Coupling, For Use with CG-2025-20
19mm Tru-Stir Stirrer Shaft Coupling, 1/2" Upper Female Coupling, For Use with CG-2025-20. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 19mm (OD) stirrer shafts. Female Upper Coupling is 1/2". For use with CG-2021 thru CG-2025 series of motors and stirrers. Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences 12.7mm Tru-Stir Stirrer Shaft Coupling, 5/16" Upper Female Coupling
12.7mm Tru-Stir Stirrer Shaft Coupling, 5/16" Upper Female Coupling. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 12.7mm (OD) stirrer shafts. Female Upper Coupling is 5/16". Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Grainger Floor Guides Screws Slding Closet Dr PK4
The PRIME-LINE Floor Guides are adjustable floor guides for sliding doors made of steel with a zinc finish. They have a low profile design and feature nylon rollers and steel stems. The stem height is adjustable from 1-3/8" to 2" to accommodate different door thicknesses. They are designed to reduce friction and noise when opening and closing sliding doors. The package includes 1 pair of floor guides.
J Kem Scientific Inc SGLE ELEM SENSOR TEF 1/4"X24"
T-1/4-T-24 Single-Element Thermocouple TempTemperature sensor - Tdiameter - 1/4 inchCoating - TeflonLength - 24 in
Chemglass Life Sciences Replacement PEEK Compression Spring, 19mm
Replacement PEEK Compression Spring, 19mm. Replacement part for CG2077G series of stirrer bearings.
Chemglass Life Sciences 6.35mm Shaft Adapter with Collar
6.35mm Shaft Adapter with Collar. Pictured Is a fully assempled stirrer shaft.
Ace Glass, Inc. 10mm bushing, glass filled PTFE
10mm glass-filled PTFE bushing, for use with self-aligning, lubricant free PTFE Trubore bearing or combination bearing / debris trap. Use with 10mm O.D. stainless steel or polished glass shafts.
Ace Glass, Inc. 3/8" flex coupling for 10mm stir shafts
3/8" flex coupling for 10mm stir shafts consists of a flexible neoprene rubber body with a PTFE sleeve inside a corrosion-resistant metal end. Flex coupling provides angular and parallel misalignment of glass or metal stirring shaft, without danger of breakage. Rubber body absorbs shock and provides quiet, vibration-free running with great torsional stiffness. Measures 4 overall.